. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Quote Originally Posted by Doddy View Post
    Welcome for the forum. St. Maarten?, let's look on the map....

    ...right... if you cover flights, accomodation and bar bills I think we should be able to get a design team to come out to help for a couple of weeks? I'll bring the paper and pens. Just let us know when's good for you...
    I'm not going all that way for a couple of weeks. If he covers flights, accommodation, and bar bills for 3 Months, I'll take him a finished machine in my suitcase..
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk

  2. #2
    Seriously symbot3 Welcome
    You have come to the right place . Helpful and knowledgeable people on here so I am sure you get the help you need .
    It is a steep learning curve and each step forward prompts another question(or two)

    I have been in the process now for a few months in a serious way so I still have a long climb , but this is the place for info.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Introduction
    By routerdriver in forum New Member Introductions
    Replies: 1
    Last Post: 18-12-2017, 12:03 PM
  2. Replies: 15
    Last Post: 25-06-2016, 10:13 PM
  3. NEW MEMBER: introduction
    By woodnut in forum New Member Introductions
    Replies: 0
    Last Post: 08-11-2014, 04:30 PM
  4. Design Help Pt2 Required for CNC design/Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 38
    Last Post: 21-07-2014, 02:05 PM
  5. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •