-
06-09-2020 #11
you are correct, it originally had a fanuc 3t of 1985 vintage. the previous owner harvested it for spare motors and drives for another machine. so there isnt much left in the cabinet. i could give him a message and see if he knows although he may not have even considered it when pulling it apart. i might email baruffaldi again and try to get the full specs of the motor. maybe see what they recommend.
-
06-09-2020 #12
Do you have 3 phase power.? I think I've got a few transformers that I've stripped out of machines, most of them usually have a 110 winding.
I don't know this turret but how big a job would it be to replace the motor, or possibly fit a Servo.? You can get large servo's cheap enough.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
06-09-2020 #13
i don't have 3 phase, it would be simpler if i did. the motor is a small integrated motor similar in diameter to a round body nema 34.
-
06-09-2020 #14
could convert it to servo or stepper operation. would be handy enough to machine an adaptor plate. would need to figure out the brake situation though.
-
06-09-2020 #15-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
06-09-2020 #16
there is a 24vdc brake on the motor
i think i will just get a site 110v transformer and a 110v to 110v vfd, and brake resistor. unless baruffaldi enlighten me with a better option
-
06-09-2020 #17-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
06-09-2020 #18
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Denford CNC Baruffaldi Lathe Tool Holders
By jamesgates1000 in forum Items For SaleReplies: 2Last Post: 04-02-2021, 10:37 PM -
VFD 220v single phase to 380v three phase.
By Richard in forum General DiscussionReplies: 28Last Post: 14-12-2020, 11:19 PM -
Baruffaldi RH80 turret
By Dangle_kt in forum Denford LathesReplies: 0Last Post: 14-03-2018, 03:35 PM -
Porter Cable 75182 Router on 110V site transformer.
By James123 in forum Porter Cable RoutersReplies: 6Last Post: 19-11-2014, 05:42 PM -
Panasonic 3 phase driver running on 1 phase?
By gavztheouch in forum Motor Drivers & ControllersReplies: 2Last Post: 10-05-2012, 11:21 PM
Bookmarks