Thread: 3018 stops after short move
Threaded View
-
21-09-2020 #4
Sorry, I missed this bit.
Here are my machine settings:
Code:$$ < $0=10 $1=25 $2=0 $3=2 $4=0 $5=0 $6=0 $10=1 $11=0.010 $12=0.002 $13=0 $20=0 $21=0 $22=0 $23=0 $24=25.000 $25=500.000 $26=250 $27=1.000 $30=12000 $31=0 $32=0 $100=803.700 $101=792.200 $102=800.000 $110=4000.000 $111=4000.000 $112=1000.000 $120=30.000 $121=30.000 $122=30.000 $130=300.000 $131=180.000 $132=50.000 ok
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Opinions Please - You No There's No Short Supply On Here
By CNCKitMan in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 11-02-2017, 07:36 PM -
machine stops when homing
By routercnc in forum General ElectronicsReplies: 10Last Post: 27-03-2016, 05:32 PM -
Best place for hard stops?
By mitchejc in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 25-11-2014, 06:39 AM -
EXPERIENCE: corkcnc ... a short tale
By purpose in forum Trading Experience & FeedbackReplies: 0Last Post: 29-12-2013, 04:43 PM -
gcode stops mid way can anyone test..
By crossleymarko in forum CAD & CAM SoftwareReplies: 16Last Post: 22-04-2012, 12:45 AM



Reply With Quote
Bookmarks