Rotary axis, z lift before rotate query

[JAZZCNC]

Try this for the start/end code. But just know that the first move will send the Z-axis to Z0 (or whatever value you enter for Z) for every program.

You could use the same line further down in one of the setup sections.
[SEQ_PRECHAR][SEQNUM][DELIMITER]G00[DELIMITER] G53[DELIMITER] Z0


start/end

[START_CHAR]
[SEQ_PRECHAR][SEQNUM][DELIMITER]G00 G49 G40.1 G17 G80 G50 [OUTPUT_MODE_CODE]
[SEQ_PRECHAR][SEQNUM][DELIMITER][OUTPUT_UNITS_CODE]
[SEQ_PRECHAR][SEQNUM][DELIMITER]G00[DELIMITER] G53[DELIMITER] Z0