Quote Originally Posted by Neale View Post
Good thought, Muzzer, although it's slightly more awkward than that. There isn't any documentation as such, it's just an applicaiton that is all in Chinese. You can guess a couple of the usual menu items based on position, and I did find one entry that gave me a COM port prompt, but that's as far as it goes! I'll need to look at whether I can extract the symbols from the app itself and translate those. It sounds like Chaz, Dean and I are all in roughly the same position - controller and servos/drivers all set up on the bench (or coffee table, in my case) so not in a position to actually do any tuning at the moment. So fingers crossed that a translated version will turn up before we actually need it!
Clive S gave me a good tip.? Use your mobile phone and a translate App. Just point camera at the screen and it will translate all the writing.
I've used this several times now and it works great. Infact that's what I did when I screwed up the parameters in the controller and turned them all back to Chinese and couldn't read the parameter description.

Regards the tuning then No I'm not at that stage, I'm waiting for you to suss it out first...