Touch screen??

[Colin Barron]

I looked at the computer cnc, the cheap DDCS kit (which looked doubtful for lathes) and the proper industrial kit. My conclusion was there is a steep enough learning curve with CNC if you buy a half decent piece of well documented kit with back up. I may be wrong but i have just received my SZGH CNC1000TDb lathe controller and looking at the manuals there are enough variables and things to learn without compatibility problems.

[John11668]

Maybe I will leave the dedicacated CNC controller for a while, like until I get the machine up and running on familiar software .
WRT touch screen I dont believe I will have light issues in my shop but I will have grubby fingers .
I though I would just like to have a touch panel mounted on the machine with PC stowed safely away elsewhere .

[Kitwn]

I though I would just like to have a touch panel mounted on the machine with PC stowed safely away elsewhere .

John,
Not sure if this would fit your requirements, but if your software has keyboard short-cut keys for all commands (as LinuxCNC does) you could use a keyboard, or a set of more robust pushbuttons driving a keyboard emulator, plus a non-touch screen to do something similar. As an example of how this trick can work I've been using one of these as a pendant for LinuxCNC for a few years now. Each button is configured to emulate a specific keyboard key to provide jogging etc.

[Doddy]

Many ways to skin a cat - and all of them wrong, or right, depends on your point of view.

I do have wired pendants for the mill, but am trying to get away from things that I trip over etc (I am rather clumsy). For my lathe (more relevant to your use case) I do naughty things (most Myford owners are rather over-zealously protective against dicking about with history) with the cabinet. Another flavour of integration with Linux CNC...



It helps that the gubbins is housed in the cabinet as well.

Apologies for the mess... the lathe is undergoing some satanic ritual at the moment.

[JAZZCNC]

For my lathe (more relevant to your use case) I do naughty things (most Myford owners are rather over-zealously protective against dicking about with history) with the cabinet. Another flavour of integration with Linux CNC...

You should be dragged into the street flogged and whipped to within an inch of your life for such atrocities.!! . . . .Not for drilling holes but buying a Myford in the first place....

[Clive S]

You should be dragged into the street flogged and whipped to within an inch of your life for such atrocities.!! . . . .Not for drilling holes but buying a Myford in the first place....

Are you going to take the piss out of me then .

[JAZZCNC]

Are you going to take the piss out of me then .

I'd take the piss out of you no matter what you had..

[Kitwn]

You should be dragged into the street flogged and whipped to within an inch of your life for such atrocities.!! . . . .Not for drilling holes but buying a Myford in the first place....

Oh heck! What do you do to people who buy Chinese mini-lathes?

[Doddy]

Oh heck! What do you do to people who buy Chinese mini-lathes?

We don't talk about that.

[JAZZCNC]

Oh heck! What do you do to people who buy Chinese mini-lathes?

Unspeakable things too gruesome to mention on a civilized forum, all I say is it involves electricity and cylindrical anatomy.