Beavermill conversion to CNC

[Andre]

Hello everyone,
We finally have finished scraping bearing surfaces on the X axis.
I decided to start from the basics because I had discovered that the table
was bend at the ends about 0.4mm on both sides.
I will show pictures of what I did to get it right.
Maybe something that someone can use it for his own project.
The first thing I did was to facemilling the carrier.
Then I milled the pigeons tail .
Then I finished it on the granite block with the scraper.
So this is straigth.
I will show you the tools aswell.
1 small scraper and 2 larger tools.