Quote Originally Posted by Neale View Post
I used a Myford for years before buying this Smart and Brown. Never thought a DRO would be that useful on a lathe. Then I started using one. Wouldn't want to use a lathe without, now. Can't remember the time I last looked at the handwheel dials. Instant switch metric/imperial - if I'm working in metric units, but only have the imperial micrometer to hand, I'll take a cut, check dimensions and set the DRO in imperial units, then switch back to metric for DoC, finish dimension, etc. Until you've been in a position to cut, measure, set workpiece dia on the DRO, then just used the readout to get to dimension, then you haven't lived! Beats scruffy bits of paper with calculations, etc, and no way are you ever going to wonder how many turns you put on the feedscrew even if the figures after the decimal point are correct.
SOLD !
Much appreciated, thanks.