Thread: Mid-sized CNC router build
-
05-10-2020 #1
Hello everyone, this is my first CNC build. Currently I'm in the planning process and I would like to share with all of you my ideas about the design and hopefully receive the feedback of other experienced members of this great forum.
The frame will be comprised of aluminum tubing of 70mm x 45mm x 3mm (wall thickness) and 5 mm steel plates to join the different pieces. Currently some of the fixing holes for screws/nuts are not included. The dimensions of the different pieces are as follows:
Front and rear tubes = 600 mm
Left and right tubes = 540 mm
Fixing corner plates = 100 mm x 100 mm / 45 mm x 45 mm
Fixing center plates = 160 mm x 70 mm x 80 mm x 45 mm
My idea is to machine soft materials as well as aluminum.
Thanks in advance for any suggestions you may have.
-
05-10-2020 #2
-
05-10-2020 #3
-
The Following User Says Thank You to routercnc For This Useful Post:
-
06-10-2020 #4
Thank you very much for your reply.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Complete soundproofing setup for 6040 sized CNC
By suspension in forum Classified Ads, Buy, Sell & SwapReplies: 0Last Post: 24-03-2018, 05:36 PM -
BUILD LOG: Desktop sized CNC
By TadasM in forum DIY Router Build LogsReplies: 18Last Post: 05-02-2017, 02:47 PM -
Looking for a dremel sized cnc router
By isdngirl in forum Marketplace DiscussionReplies: 2Last Post: 29-04-2014, 12:01 AM -
Imperial sized lead screws?
By fentiger in forum Lead Screws, Nuts & SupportsReplies: 1Last Post: 14-06-2013, 10:16 PM -
RFQ: Custom sized aluminium enclosure required
By benbenrf in forum Projects, Jobs & RequestsReplies: 8Last Post: 26-10-2009, 04:16 PM
Bookmarks