Boxford v190 cnc

[BernieNUFC]

Paul, if the 190 is fully function with the boxford software would you still recommend changing it to linuxcnc?

bernie

[depronman]

Paul, if the 190 is fully function with the boxford software would you still recommend changing it to linuxcnc?

bernie

If you have the boxford software and it’s all functional then maybe not
I’ve never tried the boxford software myself. I was told it was about £600 and the boxford would deal with educational establishments so even if my pockets had been deep enough then boxford would not sell it to me anyway

Also bear in mind that it was aimed at education as against industry and as such may be far from std in terms of G code etc
Are there any post processors that spit out boxford std g code ? As without this your life will be much harder

Linuxcnc is at least current and if there are any hardware issue then the electronics being replaced with new stepper drivers etc makes it all new and compatible
This is the root that I chose but I didn’t have the boxford software as an option


Paul


Sent from my iPhone using Tapatalk

[BernieNUFC]

If you have the boxford software and it’s all functional then maybe not
I’ve never tried the boxford software myself. I was told it was about £600 and the boxford would deal with educational establishments so even if my pockets had been deep enough then boxford would not sell it to me anyway

Also bear in mind that it was aimed at education as against industry and as such may be far from std in terms of G code etc
Are there any post processors that spit out boxford std g code ? As without this your life will be much harder

Linuxcnc is at least current and if there are any hardware issue then the electronics being replaced with new stepper drivers etc makes it all new and compatible
This is the root that I chose but I didn’t have the boxford software as an option


Paul


Sent from my iPhone using Tapatalk

Its better than i thought, its in brilliant condition and has all the cd's with manuals and software v10, it is loaded and working via usb on a win 10 pc and i have downloaded a 260 post processor for fusion that has been created by someone and i have asked the question if this will work on my 190, i am in a very very new area to what i am used to so need to go slowly, but i have to say i am excited :-)

[depronman]

BernieNUFC - a massive thankyou for the PC's that arrived todays. I have cleared them out with an airline and installed LCNC on the better specced one.
Not conencted to the mill yet, but running the jitter test it looks very good at well under 20,000

Thanks again
Paul

[BernieNUFC]

great news thank you, glad to have helped

Bernie

[John11668]

Likewise Bernie !
Thanks from me . I havent got it up and running yet . Tells me Boot mgr is missing but I presume I will get some advice from here on how to deal with that, and I am guessing that a Linux install will have different requirements anyway !

John

[depronman]

Likewise Bernie !
Thanks from me . I havent got it up and running yet . Tells me Boot mgr is missing but I presume I will get some advice from here on how to deal with that, and I am guessing that a Linux install will have different requirements anyway !

John

Ya the hdd will have been wiped so the pc doesn’t see a boot manager which is normally part of the windows install
When you load linuxcnc it will then provide the linux boot manager and all will work perfectly

Paul


Sent from my iPhone using Tapatalk