Boxford v190 cnc

**depronman** · 13-10-2020

BernieNUFC - a massive thankyou for the PC's that arrived todays. I have cleared them out with an airline and installed LCNC on the better specced one.
Not conencted to the mill yet, but running the jitter test it looks very good at well under 20,000

Thanks again
Paul

**BernieNUFC** · 14-10-2020

great news thank you, glad to have helped

Bernie

**John11668** · 14-10-2020

Likewise Bernie !
Thanks from me . I havent got it up and running yet . Tells me Boot mgr is missing but I presume I will get some advice from here on how to deal with that, and I am guessing that a Linux install will have different requirements anyway !

John

**depronman** · 14-10-2020

Originally Posted by John11668

Likewise Bernie !
Thanks from me . I havent got it up and running yet . Tells me Boot mgr is missing but I presume I will get some advice from here on how to deal with that, and I am guessing that a Linux install will have different requirements anyway !

John

Ya the hdd will have been wiped so the pc doesn’t see a boot manager which is normally part of the windows install
When you load linuxcnc it will then provide the linux boot manager and all will work perfectly

Paul

Sent from my iPhone using Tapatalk