Boxford v190 cnc

[depronman]

I've a wry smile on my face as I type this. If you think that is bad... welcome to LinuxCNC :)

Yes, I know you're talking about the ISO burner, and I'll admit to not having tried that particular package, but you're gonna need a cup of tea and a pack of HobNobs if you're going to get your head around LinuxCNC. Standard setups are fairly straight forward, but go off piste and you'll be grinding your teeth.

I could not agree more Doddy
Every time I think I understand linuxcnc configuration I realise that I don’t
But I am getting there and the linuxcnc forum is excellent

The stepconfig wizard gets you the basic machine up and running then you built it up from there. I’ve eaten more than one packet of chocolate hobnobs

Don’t forget the parport configuration that I posted yesterday this tool me all evening to work out that the parport must be disabled in the bios This allows it to be seen along with a pci parport by Linux
This makes no sense to me but it worked on both versions of Linux and on linuxcnc 2.7.14. 2.7.15. 2.8. 2.9


Paul


Sent from my iPhone using Tapatalk