Denford Mill Comparison

[depronman]

What you will find unless you have a very large budget and equally large workshop space is that there is always a need for a larger machine because of a certain job
I had this issue for some years and as such never bought a machine
What I realised was that there was loads of jobs that it would have done and the odd one that would not fit on the machine
I ended up with a need ti mill a 19mm hex on some parts that I was making from aluminium billet. I looked to get them milled locally and realised that whilst I could get it done readable cheaply I was always at the back of the queue
So I put my hand in my wallet and bought the Starmill
It’s served me well but I was offered a boxford vmc190 and bought it

Paul