Table saw blade rising mechanism using cnc parts

[Radu_Andrei]

Just to add a bit more detaills to the topic.
I intend to build one device as mentioned above, for my tablesaw.
Also I need to build a simpler device for a sawmill. Any approach will do, as long as it has a motor coupled to one toothed wheel (the opposite one to the handle in the photo), implicit to the end of a lead screw, and two buttons. Up and down. To do just that, move the assemble up and down, exactly as the handle does now. Weighs around 90 kg, but it turns very easy by hand.

Besides that, I already have a pannel I bought some years ago from china, when I built the cnc. I was planning to automate my small metal lathe, but I did not have the change to use it yet. Perhaps it might work for the table saw project. Here's a link with the unit.
https://www.ebay.com/itm/3-Axis-CNC-...b0yG7rBfiJWDM0

Also, there are some single axis programable controller on ebay at around 50$. I never used one, have no ideea if there are any good or work for what I need. Any insight about this product would be great.

[mekanik]

Hi Radu
Attachments 29016/29017 don't work

[Radu_Andrei]

Hi phill05.
I like very much how this thing looks. Just to make sure, I got it right. I need to order those 6 items, then do some soldering, then do some settings via the keypad. No programming required. No pc.
It totals around 100 pounds plus international postage in my case. Can be payed via paypal. Did I get it right? Also, is is possible to buy an already assembled unit, or this is the only way available?