Hello everyone,

I've just finished building my Ooznest CNC and I'm trying to level my spoiler board in relation to the X gantry. I've set up job profile to the full size of my spoiler board and a pocket cut set to the dimensions of the safe work area of my machine. In this case that's 1300mm x 1270mm. However despite checking and checking the vectric software for any errors on my part it's not cutting out what I tell it to. It's making a pocket at the correct depth but its only cutting it to 1034 x 1007. A good bit short of where it should be in both x and y.

Any thoughts?

Martyn