Hybrid View
-
22-10-2020 #1
Am a new members
Using a laser cutting machine.
Also am into designing and complete execution of jobs
Can someone suggest a replacement for wm234 ma driver it's used in a laser cutting and engraving machine.
-
22-10-2020 #2
That looks like quite a basic drive. From a quick search it's rated at 40V and 3A with a 50% idle current reduction.
It's also apparently a direct swap with a Q2HB34MA, which brings up this page with connection detail - https://szjingbo888.diytrade.com/sdp...or_driver.html
The only unique feature of the drive, is it's designed for 6 or 8 wire motors, which I honestly have no idea why it does that, other than that page mentions "6 or 8 leads motors have to be used because of the special control circuit in the drive."
Something like a Leadshine DM542 will give you an option for 50% current reduction at idle, however you'll need to alter wiring slightly.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
The Following User Says Thank You to m_c For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Replacement Stepfour stepper motor
By Ross Shellard in forum Stepper & Servo MotorsReplies: 3Last Post: 15-06-2016, 04:58 PM -
Hi replacement moons motor driver sr4h
By cockneyrebel in forum General DiscussionReplies: 2Last Post: 24-02-2015, 03:41 PM -
How do I wire a stepper driver to a stepper motor?
By swood1 in forum Stepper & Servo MotorsReplies: 7Last Post: 21-09-2014, 05:40 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
Stepper Motor Driver v2.3 2A $20 !!!
By Lee Roberts in forum Motor Drivers & ControllersReplies: 15Last Post: 17-05-2009, 10:57 PM
Bookmarks