Threaded View
-
23-10-2020 #1
Good Afternoon,
Quick question I bought a 6040Z chinese machine on eBay and I am already regretting it. Anyway, it didn't come with limit switches so I had to install those. They are all working thank god!
I have been trying to setup the touch plate and it is "working" but not properly. By that I mean once I touch it, it shows that connection was made but it does not stop and retract. After some investigation I have discovered that the Z limit switch input is the same as the touch probe "input 3" and that is why it is not working properly I am assuming. Now the funny not so funny thing is technically they are connected to different pins on the board itself. One is connected on "ZXW" and the probe is connected to "DD".
My question is, is it possible to use the same input for 2 things? Have you guys discovered a way around this?
My board is the JP-3163B, v3.9.
Best Regards,
AndreD.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
On going chinese 6040 problems
By amxen in forum Chinese MachinesReplies: 65Last Post: 03-06-2020, 08:46 AM -
More Problems with Chinese 6040
By Rye in forum Chinese MachinesReplies: 11Last Post: 07-12-2017, 01:13 AM -
Touch Probe Project
By Washout in forum Tool & Tooling TechnologyReplies: 2Last Post: 20-11-2013, 12:59 PM -
Touch Probe
By luke11cnc in forum Probing, Digitizing & ScaningReplies: 28Last Post: 31-01-2012, 01:16 AM -
RFQ: Touch Probe - Lathe job
By cooliced in forum Projects, Jobs & RequestsReplies: 2Last Post: 16-11-2011, 07:12 PM
Bookmarks