. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 30-10-2020 #1
    Boyan Silyavski's Avatar
    Lives in Denia, Spain.
    Boyan Silyavski
    Last Activity: 15-04-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,049. Received thanks 333 times, giving thanks to others 55 times. Made a monetary donation to the upkeep of the community.
    The real triangle in CNC is

    Working Area/Rigidity/Speed

    And raising each one of them costs MONEY
    project 1 , 2, Dust Shoe ...
    Reply With Quote Reply With Quote
  2. 31-10-2020 #2
    Kitwn's Avatar
    Lives in Don, Tasmania, Australia.
    Kitwn
    Last Activity: 22-07-2025 Has been a member for 7-8 years. Has a total post count of 984. Received thanks 118 times, giving thanks to others 52 times.
    Quote Originally Posted by Boyan Silyavski View Post
    The real triangle in CNC is

    Working Area/Rigidity/Speed

    And raising each one of them costs MONEY
    Very true. And for a given price point working area and rigidity are inversely proportional, so aiming for a modest work area as you are and not expecting to build a machine rigid enough for cutting metal and large enough for handling sheet timber is your most significant decision.
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Low resolution absolute encoder source?
    By m_c in forum General Electronics
    Replies: 2
    Last Post: 13-11-2016, 01:38 PM
  2. Advice on spindle/drill bits for a beginner
    By Skydeals in forum General Discussion
    Replies: 7
    Last Post: 20-10-2014, 10:25 PM
  3. Beginner needs advice
    By Gregor in forum CAD & CAM Software
    Replies: 21
    Last Post: 04-01-2014, 09:39 PM
  4. NEW MEMBER: Complete Beginner requiring advice!
    By Robduffer in forum New Member Introductions
    Replies: 13
    Last Post: 07-05-2013, 04:17 PM
  5. Stepper motor advice for absolute novice
    By mbgnjdb5 in forum Stepper & Servo Motors
    Replies: 2
    Last Post: 07-05-2011, 04:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules