Quote Originally Posted by routerdriver View Post
I have had modest success using the 20 degree engraving cutters that can be had on a well known auction site quite cheaply (if you wait for them to get from China to Europe).I also used engraving cutters for routers that go to a sharp point with 60 degree,90 degree or 120 degree tips.I didn't try easel as I found the free F-engrave unbelievably good.You might like to see if it will work with your intended project.If you haven't already tried it,Camotics for simulation can give you an insight into what will be coming off the machine.
Thanks for the info, much appreciated! :o)