Threaded View
-
Don't get despondent. This is a good forum and you will get help.
But first try and help yourself by reading some of the great build logs on here, there are plenty on them.
Draw the frame up in CAD and ask for criticism. You will need to lean CAD anyway.
Linuxcnc with a P/port is very doable and is free, the BOB (breakout board) £5-6 on ebay. That alone will save you a chunk on money. For a simple basic machine linuxcnc can be set up in 15 mins.
But don't buy kits of part as they are never matched up. We can point you to the best places to buy the rails ball screws etc.
Start with the frame...Clive
The more you know, The better you know, How little you know
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Welding gas advice needed
By cropwell in forum Welding, Brazing & EquipmentReplies: 8Last Post: 03-12-2019, 03:07 PM -
Needed some advice, please.
By PLIP5 in forum General DiscussionReplies: 3Last Post: 29-07-2018, 07:45 PM -
Advice needed on everything
By chrisjames in forum General DiscussionReplies: 12Last Post: 11-11-2015, 11:40 PM -
NEW MEMBER: Hello guys im a new member from the uk and looking for advise
By charlieallshapes in forum New Member IntroductionsReplies: 3Last Post: 05-10-2015, 08:20 PM -
NEW MEMBER: hey guys, help fom experienced fanuc controlled cnc programmers needed. thanks
By benread89 in forum New Member IntroductionsReplies: 1Last Post: 18-08-2011, 04:20 PM
Bookmarks