. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 27-11-2020 #1
    CNCRY's Avatar
    Lives in UK, United Kingdom.
    CNCRY
    Last Activity: 04-01-2021 Has been a member for 4-5 years. Has a total post count of 62. Received thanks 2 times, giving thanks to others 5 times.
    Hi Jazz - hope all is good. Sorry to thread hijack, just read your comment about the 230V pump - while running mine today I remembered I'm still using one of those potential death traps with no earth submerged in coolant! From what I can tell (no details with it) its probably 3000L/Hour flow rate .
    Do you recommend a better 230V pump or 12/24V versions? Thanks
    Ryan
    Reply With Quote Reply With Quote
  2. 27-11-2020 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by CNCRY View Post
    Hi Jazz - hope all is good. Sorry to thread hijack, just read your comment about the 230V pump - while running mine today I remembered I'm still using one of those potential death traps with no earth submerged in coolant! From what I can tell (no details with it) its probably 3000L/Hour flow rate .
    Do you recommend a better 230V pump or 12/24V versions? Thanks
    Ryan
    To be honest I just use 24Vdc pumps that they use for solar heating, they are cheap and safe. Plenty of them on Ebay.
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Welding gas advice needed
    By cropwell in forum Welding, Brazing & Equipment
    Replies: 10
    Last Post: 08-07-2025, 06:37 AM
  2. Needed some advice, please.
    By PLIP5 in forum General Discussion
    Replies: 3
    Last Post: 29-07-2018, 07:45 PM
  3. Advice needed on everything
    By chrisjames in forum General Discussion
    Replies: 12
    Last Post: 11-11-2015, 11:40 PM
  4. NEW MEMBER: Hello guys im a new member from the uk and looking for advise
    By charlieallshapes in forum New Member Introductions
    Replies: 3
    Last Post: 05-10-2015, 08:20 PM
  5. NEW MEMBER: hey guys, help fom experienced fanuc controlled cnc programmers needed. thanks
    By benread89 in forum New Member Introductions
    Replies: 1
    Last Post: 18-08-2011, 04:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules