Threaded View
-
07-01-2022 #13
Hi All,
Trust you all had a safe and good festive period.
I've spent a vast amount of time getting to grips with Fusion 360 and been modelling up as much of the X3 as possible with as much accuracy as I reckon I need. Link to fusion design here https://a360.co/3EeD874.
I also spent a large amount of time in the shed making my Y axis stepper mount plate, much swarf, many broken cutters from trying to get used to machining with a flexible machine and a low powered router head. (BOXZY robot)
So here it is, my Y axis plate with stepper mounted at the rear so that it doesn't stick out the front too far and take up too much room in what is already a small space.
Any suggestions for good pulleys and belt to stop backlash before it gets introduced much appreciated - I've seen mentions of HTD5 and am thinking 15mm with 18 tooth pulleys.
Cheers all.
Last edited by CNCMEBABY; 07-01-2022 at 01:04 AM. Reason: Added link to Fusion model
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Warco WM18 or WM16B
By hedeon in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 25-08-2021, 12:44 PM -
CONVERSION: Warco WM18 Mill Stepper motor advice
By Gotty101 in forum Conversion Build LogsReplies: 7Last Post: 18-08-2018, 05:06 PM -
Siege sx3 or Marco wm18
By terry1956 in forum Machine DiscussionReplies: 3Last Post: 09-02-2017, 12:02 AM -
Super sieg x3 conversions
By dazza in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 19-02-2014, 10:28 AM -
Wabeco F1410LF vs Warco WM18 vs Sieg X3
By abfa9358 in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 02-08-2009, 08:23 AM
Bookmarks