. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 25-12-2020 #1
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Ale View Post
    I have found those before, but max nut size is 20mm, while I should look for 32mm as you suggested. So I will try make it locally. I guess 20mm is too low.
    Look again because now they have 25 and 32 versions.


    Quote Originally Posted by Ale View Post
    Could you let me know where can I get motors you used?
    These are what I use. They are not the cheapest and for not much more money you can get servos, but like I say they are simple and reliable without any of the hassles servos introduce. I've fit dozens of sets so far and never had a single issue.

    https://www.aliexpress.com/item/3279...7c1f6f37fvbQyT
    -use common sense, if you lack it, there is no software to help that.

    Email: [email protected]

    Web site: www.jazzcnc.co.uk
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

    Ale
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Reducing 12v DC to 0.5V DC no more than 1A draw
    By AdCNC in forum General Electronics
    Replies: 18
    Last Post: 31-12-2022, 08:14 PM
  2. Simple 3D Gear design software recommendation
    By Leadhead in forum CAD & CAM Software
    Replies: 22
    Last Post: 11-11-2017, 01:30 PM
  3. Reducing noise during run with box enclosure
    By Skydeals in forum Machine Discussion
    Replies: 4
    Last Post: 12-02-2015, 08:43 PM
  4. Reducing costs
    By tonygagey in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 13-08-2014, 11:33 AM
  5. My first gear, a deadbeat escapement gear for my clock
    By clockman in forum Woodworking Project Showcase
    Replies: 9
    Last Post: 30-01-2011, 11:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules