Thread: Mach 3 homing issues
-
29-11-2020 #1
Hey guys, im going to try and explain this the best way I can so bare with me.
When I make a cut on my cnc I'm usually using multiple tool paths one after the other with a tool change for each tool path, so when I start mach3 I jog to the centre of the workpeice and home it a couple of inch above where I need it to be and the dro then reads zero on all axis but on one of my other jobs I accidentally saved fixture when I shut mach3 down, so now when I try to set my home position the dro doesn't zero itself. Can anyone help me reset my home position?
Thanks
-
29-11-2020 #2
Never mind i fixed it lol. Panic over
-
29-11-2020 #3
Hi Richard,
I know you sorted it but do you understand how it happened.? If not then I'll explain why if you like but before I can do that properly I need to know if you have Home switches fitted.?-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
About homing and switches...
By JW1977 in forum General ElectronicsReplies: 39Last Post: 09-09-2019, 09:16 PM -
CNC first setup homing
By Gary1329 in forum General DiscussionReplies: 1Last Post: 30-07-2019, 11:40 PM -
Mach 3 Turn - CAM Issues
By Chaz in forum CAD & CAM SoftwareReplies: 9Last Post: 07-08-2017, 05:16 PM -
A Cunning Plan For Accurate Homing With Mach 3?
By magicniner in forum General DiscussionReplies: 8Last Post: 04-04-2016, 01:48 PM -
Problem with homing
By Andyman in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 22-03-2016, 07:56 PM
Bookmarks