Hi Jazzcnc

The guy called David and you can see he's machine in eBay but I found him on Facebook to "Woodwork" it's called.
What you saying is correct about no limit switches on the machine.
What I did is the mach3 top sections saying configuration and at the very bottom asking reset.
I was sent a message to him about what happened and he's asked me to open the controller box and go true what he asked.
All the lights are green how it should and one is blue etc. So he said it's all ok there.
He asked me to open the motor configuration page and send a screen shot and he said the settings are not right.
He send me a files and said if I drop that file in it would sort this problems.
I did but nothing happened. I mean when I try to jog the machine it's only go one way the X axis and when I want to shift the whole machine only one motor moving instead of two.
And the motor which is shifting the spindle up and down not respond but the mach3 software showing is moving up or down.
But when I jog the machine only move one direction regardless what arrow I press on that axis......
I try to get a cnc I can work with and very little shown when I googled it ..... Unwanted to something sturdy enough and not a hobby things.
He's not got bad reviews and I thought it be ok.
He's explained how to run my programs next time to not happening this again.
But now it's somehow isn't working how it should.
Probably I better explain true the phone what happened ....I can speak English but struggle to explain something written....I'm Hungarian.