Hi Jazzcnc

Problem solved
The CNC is working now.
It was my mistake,I thought I replaced both of the files he sent me but obviously not. I did it again today and now it's fine.
However I thinking it's a big job to add on limit switches to the machine? Probably not just a simple job specially need to get the mach3 altered to....
Most of the time I use a same program on to the machine so one's is set it should be fine but later on I want to use it for different Jobs.
Only one thing is still worrying.
When the gantry motors not worked properly just one was running so I wonder if they are slightly off set eachother?
How I can get that fixed?
I take some measurements and looks have a few mm different.
Regards
George