Quote Originally Posted by JAZZCNC View Post
What Nema Size you wanting Robin 23/24 or 34's.?

I've got some Lichuan Nema 24 5.5Nm 2 phase closed loop with 70V AC or 100Vdc drives with 3Mtr cables which I'm offering to Forum members. £125.00 plus postage.

https://www.aliexpress.com/item/1005...568f4df8dMSFFL


Also got some Closed loop 10Nm 3 phase Nema 34's using Mains voltage drives but those might be a little too large and expensive.
These are great for large machines where high speed isn't required and simplicity is prefered to more complicated servo's. The motors are nice and smooth being 3 phase and with being mains drives they still spin at resonable rate with good torque at higher rpm's. The closed loop makes them nice and reliable in position terms.

If you don't require what Servo's offer then they are good option and pretty much plug n play with no messing around tuning etc.


https://www.aliexpress.com/item/3279...42906f37My63lC
Apologies for the hijack, just wondering if it's necessary to step down the mains voltage for the 220V drivers?