Threaded View
-
20-12-2020 #21
Hi Muzzer
Yes you are correct and I should also be able to rotate part placement. So long as the parts are always the same way around and the XY of the PCB relative to the parts or the bed is known then the rotation information in the position file will allow that to be automated but again with manual confirmation I can have a button that rotates parts 90 degrees if the are wrong before placement confirmation because as they are all passives with no polarity that is very quick to correct for and of course I could just do +90, -90 and 180.
Yes by all means send me some pictures of your "stencil printer". I have just bought an SD-240 for frameless stencils that makes life easier although the 175*90 PCB was a struggle and did not come out so well. I am always trying to get my cheapskate employer to buy me more gear so maybe they will be interested and hopefully it's compatible with what I have. I am currently working at home which makes assembling boards a lot easier as I have my own equipment which is more than they have and more importantly my lab is a large bedroom not a shaky shipping container (I have already binned an item worth £300 just because someone walked across the floor and everything shook so badly that the culmination of a difficult attempt to solder a missing part to board that was very difficult to get up to temperature ended in failure and i could not be arsed to have another go or risk damaging it anyway with a second reheating attempt).
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Gravograph L solution 300
By petesurrey in forum Items For SaleReplies: 0Last Post: 30-12-2018, 02:41 PM -
Is having a wobbly bottom normal? Drill Vice...
By Dangle_kt in forum Workshop & EquipmentReplies: 9Last Post: 13-01-2017, 04:39 PM -
1st time setting up.. whats normal..
By Marlin in forum Motor Drivers & ControllersReplies: 26Last Post: 01-09-2014, 04:53 PM -
Hold down solution
By jonbabbz in forum General DiscussionReplies: 4Last Post: 11-10-2012, 08:21 PM -
Looks like the normal first page has gone awry.... or is it my PC?
By WandrinAndy in forum General DiscussionReplies: 22Last Post: 03-10-2012, 08:05 PM
Bookmarks