Help with a usb BOB Spindle problems

[Lahdiel]

gotcha, think i'll just look for another dc controller since whatever i try and do with the lenze the second it gets power it spins up the spindle and pops the breaker
might try get it working some day but the headache it seems to cause isn't worth the time right now

[depronman]

Have a look at tread mills I bought one for £20 a few months ago fully working and local
It’s got a DC controller and dc motor. Meant to be 2hp but that will be Chinese 2hp if you get my drift

Paul


Sent from my iPhone using Tapatalk

[Lahdiel]

i'll keep that in mind for when i inevitably want a more powerful spindle
that said my little motor has been cutting steel fairly well most of the day

[depronman]

I don’t find my vmc190 to be underpowered
It’s a small machine and as such you can’t expect it to take massive cuts
I’ve added flood cool to mine over Xmas and that makes a big difference

Cheers. Paul


Sent from my iPhone using Tapatalk

[Lahdiel]

i think i got a decent deal with mine, came with the factory mist system, though i probably will upgrade to a flood at some point if heat becomes an issue

[depronman]

I didn’t fancy breathing in the coolant fumes
Not a fan of mist coolant systems to be honest

Paul


Sent from my iPhone using Tapatalk

[Lahdiel]

i guess you're right but since its pretty much an enclosed space it should be fairly easy to setup a trap or extractor for that i'd assume

[depronman]

i guess you're right but since its pretty much an enclosed space it should be fairly easy to setup a trap or extractor for that i'd assume

Yes possibly but is it worth the trouble


Sent from my iPhone using Tapatalk