Strong vibrations in ball screw linear actuator - is it normal

[mbridge87]

No. It won't harm the motor, it can run hot well in excess of 50C.

Ie. re the drive what voltage can it handle. if it is 50V then use about 10% less 45V. it is the volts that matter.

What voltage are you using and what amps can the power supply give?

This particular driver (linked below) connects directly to AC so it's 240vAC. It has the PSU built in unlike the DM 542T drivers I have which utilize a separate PSU that supplies 42.5 volts. I double checked and there is nowhere you can select the voltage, the manual suggests this is set automatically by the driver. Do let me know if I've done something stupid there.

https://www.omc-stepperonline.com/di...per-motor.html

In terms of Amps, this screen grab shows you all the different options.