Hey everyone. So here's a video which shows the vibration issue:

https://drive.google.com/file/d/16sI...ew?usp=sharing

As I mention in the video there seems to be a sweet spot in terms of movement speed where the vibrations are really bad. If moving faster or slower than this sweet spot it seems to be ok. I experimented with different micro step settings a week ago and this didn't seem to make a difference, although this was before I realised there was this sweet spot and so I may test again.

The motor is hooked up to this driver, it's a 3DM2283T.

https://www.omc-stepperonline.com/di...per-motor.html

Would love to hear your thoughts.

Thanks,

Max