Inkscape problem

[RichardR]

Just an update, as it seems not many of you use inkscape with JScut, I seem to have found where I was going wrong, the main logo was something I took from the internet, the rest was designed within Inkscape. The logo I pulled of the net had to be selected then in the Path menu Trace Bitmap had to be operated, then after placing the result within my oval's with the text had to be Grouped together, then the whole design has to be selected and in the path menu Object to path was operated and then I saved the end SVG file.
Once this file had been opened in JScut and set up the result was saved as a G code and loaded into Mach 3, I ran the program on the computer and all seems good. Once I brave the cold I will go into the garage and try routing it out on my 6040

I have completed my design on the machine and all went well, however i need to increase the size of the text and the spacing between each letter to suit the 1.5mm cutting tool as that is the smallest i have at present, all things I will learn as I go forward