-
12-01-2021 #1
Hi all,
I'm after some advice as to the best way to achieve the best results welding up the part shown in the attached picture.
- The blue is mild steel rectangular section 40mm x 20mm x 2mm
- The green is mild steel plate 6mm thick
Would it be advisable to weld all the box section together in a rectangle first and then weld the plate on top?
Or better to weld each box section onto the plate, one by one?
I'm going to flatten it on a mill afterwards so doesn't have to be granite flat but the flatter the better really.
Cheers,
Marc
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Anyone had success please with the fusion Mach3 post on 8 station Denford Triac?
By suesi34e in forum Fusion 360Replies: 8Last Post: 26-12-2017, 02:12 PM -
Help me get cutting - 5 year long build... No success(
By rbs in forum Opportunities Available & SoughtReplies: 1Last Post: 14-05-2015, 05:49 PM -
Autodesk Fusion 360 $300yr FOR LIFE, LAST CHANCE !!!
By Lee Roberts in forum Fusion 360Replies: 0Last Post: 09-11-2014, 04:08 PM -
EXPERIENCE: AluminiumWarehouse - don't expect to get what you order
By m_c in forum Trading Experience & FeedbackReplies: 0Last Post: 05-04-2014, 01:36 PM
Bookmarks