Quote Originally Posted by John11668 View Post
I can make things happen on the screen but it wont do anything with the machine ,(not even Jog)
My machines have both run in Mach 3 using the UC100 USB controller but nothing in M4 so I am guessing it needs ethernet controller .
I dont mind the expense as long as it works . Same applies to the license . I guess both of them could be moved forward to my next project .

Who has used M4 with such a controller and how did it go .
Have you successfully run a machine on Mach 4 m_c ? and if so with what motion controller
I have raised a question on the cncdrive forum but they are telling me that the problem is something missing in M4 . Typical when you have two products running hand in hand that if it fails to work each blames the other