Thread: Felder hammer desktop machine
-
22-01-2021 #1
Hi everyone
I had an Email from Felder group this morning promoting their new "Portal milling machine 47.82" ( I am on their list as I bought a planer thicknesser ) so I clicked on the link to have a look as I actually will be needing a machine very soon due to flooding.
As I looked through the spec and pictures I thought "ok maybe not too bad if its cheap ish" there were certainly some bits I didn`t like the look of though,
then I scrolled to the bottom and saw the price. ......not cheapish at all.
It does look like it works fine but value wise not good.
I wonder if you will agree with my assesment ? It does not even have ballscrews but trapezoidal screws and nuts.
Here is a link to it https://www.felder-group.com/en-gb/p...-47.82-p142995.
Needless to say it is not on my shopping list.
Ollie
-
23-01-2021 #2
They claim a "unique price/performance point." I would certainly agree with that! Does this just reflect European engineering costs compared with Chinese?
Trapezoidal screws but with double anti-backlash nuts. Nuts are mounted with bolts in slots to adjust. Crude but effective for a woodworking machine?
-
23-01-2021 #3
Neale, you hit the nail on the head it was the crudeness that surprised me about it.
Felder make very high end woodworking stuff like the format 4 machines, they have some fantastic panel saws with a finger detection like sawstop but non destructive, so I was a bit dissapointed at their efforts here.
Ollie
-
23-01-2021 #4
There are more considerations than just lead screws, for instance, look at the spacing between the rails on the gantry. Looking at the narrow Z-axis I'd also bet a packet Hobnobs on it they only use 1 linear bearing on each rail. Same for the long axis, it's not very wide, it's covered hiding who knows what, and while I won't bet a full packet of Hobnobs I'd certainly give you few biscuits and a dunk in my tea if it didn't.
The machine design isn't the best IMO. I'm always suspicious of machines that are covered and don't show under them. Covers hide a multitude of corner cuttings.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
24-01-2021 #5
I was a bit dissapointed at their efforts here.
As you say Ollie, I have allways been a fan of the Felder Machines but this bit of kit looks like nothing more than tat with a Felder sticker and a high markup.
-
24-01-2021 #6
There is always market space to peddle tat. The Chinese have been doing it for yonks, even companies from Devon got in on the act. So if HAAS can do it why not Felder?
-
25-01-2021 #7
Ha ha. Cropwell, I wonder which Devon based company you mean ?!
The Haas with the controller as big as the chinese router its stuck to is just crazy madness too.
OllieLast edited by Ollie78; 25-01-2021 at 08:53 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help on fault finding on a C3-31 Hammer combination machine
By OMLCNC in forum Workshop & EquipmentReplies: 49Last Post: 18-12-2017, 12:58 PM -
Hi precision desktop machine
By D-man in forum Machine DiscussionReplies: 5Last Post: 24-06-2016, 09:00 AM -
eBay: Cutler and Hammer (vice?) foot pedal
By jamesgates1000 in forum Items On eBay UKReplies: 0Last Post: 20-10-2015, 07:33 AM -
FOR SALE: Selling my desktop CNC machine
By clbc in forum Items For SaleReplies: 1Last Post: 17-08-2015, 01:58 PM -
5 axis desktop machine Kickstarter
By 5AXISMAKER in forum Machine DiscussionReplies: 6Last Post: 24-09-2014, 08:41 PM
Bookmarks