-
21-02-2021 #41
it could be some of the problem Doddy, but i can see the same pattern in this acrylic test, same settings just different material.
But all in all i am chuffed to bits with the fact the thing works, i do have one more question - who am i kidding, like its going t be the last question!!!
i cut a complex pocket file with lots of short moves and direction changes and the noise/resonance from the steppers was horrible, the file cut ok but seemed to be rattling the fillings out of the machine, can i tune some of this out playing with the stepper tuning?
steve
-
22-02-2021 #42
That looks like some quite bad backlash.
I'd start with measuring to see what backlash there is, before worrying about any tuning.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
22-02-2021 #43
After you check the backlash you might check the acceleration setting in your controller software as well. Winding this back will increase the cuting time for complex shapes but reduce the shaking.
An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
SOLD: Hobbymat MD65 mini lathe and BF65 mini mill
By Boyan Silyavski in forum Items For SaleReplies: 3Last Post: 03-11-2018, 12:45 PM -
equivalent of HAAS mini mill 2
By pnub93 in forum Machine DiscussionReplies: 16Last Post: 10-02-2018, 02:19 PM -
Mini 5 axis cnc mill
By andy_con in forum Machine DiscussionReplies: 1Last Post: 16-12-2015, 09:46 PM -
eBay: SX2 Mini-Mill - Complete Setup.
By grunt-will in forum Items On eBay UKReplies: 2Last Post: 30-01-2014, 08:28 PM -
A viable mini-ish-mill build, or a hiding to nothing..?
By Wal in forum Milling Machines, Builds & ConversionsReplies: 3Last Post: 02-07-2013, 07:33 PM
Bookmarks