My new machine - Guess the make!

**Pilsbury** · 26-11-2021

Back once again! I’m not a good forum member am I? So sporadic! But I’ve been busy planning my loft conversion.

Anyhow, I thought I’d try a box joint mini project just to get my eye in for when I need to do something proper.

Used the Aspire box creator gadget and with a little jiggery pokerey it works pretty well. Here is my effort. Looking forward to putting it to decent use rather than a sealed mdf box…. Can’t even burn that on my fire!

https://youtu.be/cdWgKo-65-4

**JAZZCNC** · 26-11-2021

Looking good mate, nice to see you back again.

**Pilsbury** · 15-12-2021

So, I was looking for a project that didn’t look “too CNC” but mainly used the CNC!…..

So I used the CNC for damn near everything, even when it didn’t warrant it! Christ knows what I’m going to use this for….. CNC bits???

Click image for larger version.

Name: 07682829-354A-49E7-A2B4-249C7CBB81E0.jpg
Views: 622
Size: 370.2 KB
ID: 30710

Click image for larger version.

Name: C81B439E-4AC9-481E-8E0E-E1E760F2542E.jpg
Views: 575
Size: 344.6 KB
ID: 30711

**Kitwn** · 16-12-2021

Originally Posted by Pilsbury

So, I was looking for a project that didn’t look “too CNC” but mainly used the CNC!…..

So I used the CNC for damn near everything, even when it didn’t warrant it! Christ knows what I’m going to use this for….. CNC bits???

Or you could build a replica Victorian pharmacy (and make a TV series). Very nice work!

**JAZZCNC** · 16-12-2021

Originally Posted by Pilsbury

So, I was looking for a project that didn’t look “too CNC” but mainly used the CNC!…..

So I used the CNC for damn near everything, even when it didn’t warrant it! Christ knows what I’m going to use this for….. CNC bits???

Excellent work as a usual mucker, nice to see you are exploring what the machine can do. Could always throw a few draws away and turn it into an advent calendar....

**Pilsbury** · 16-12-2021

Ha! Yes…. It is an apothecary cabinet. Maybe I can store those miniature spirits and medicate myself as necessary.

**robrose** · 24-06-2022

Its too clean to be a proper workshop. No dust, no clutter. Great looking CNC machine.
Mine has just arrived yesterday Genmitsu 3018 prover. Will put it together this weekend and see how it goes. Planning on using if fro PCB's and making hands for antique clocks.

**Pilsbury** · 15-02-2023

I’ve been out of my workshop for the best part of 12 months doing my loft conversion. On the home straight now with a mere couple of months to go, so will be back trying to think of a monster project to furnish the new room.

However, a friend is retiring from Fire Control and people wanted a chopping board retirement gift. So thought I’d just “bang one out”. Didn’t quite turn out like that as I felt like I had to relearn a load of stuff being off the machine for so long! I even cut the plug the same as the pocket and not reversed. That was a £20 oak mistake!

Here’s the video - from a CNC perspective, half way through is that. The first part is just the making of the boards.

https://youtu.be/1HYHka0fDis

**Pilsbury** · 20-02-2024

Back again with a new project. This one took several months due to some near disasters with the electronics side of things….. had it all gone wrong it would have been a few hundred quid down the drain…. I never knew what a “smart table” was until I saw a Russian and a Chinese guy make one…..

https://youtu.be/L82zj9mbCQY

**Pilsbury** · 15-03-2024

Another project completed with corresponding YouTube vid! This project I saw about 3 years ago and was what got me interested in CNC.

https://youtu.be/vgkyNiEMQgc