. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 12-02-2021 #11
    Kitwn's Avatar
    Lives in Don, Tasmania, Australia.
    Kitwn
    Last Activity: 15-07-2024 Has been a member for 7-8 years. Has a total post count of 983. Received thanks 118 times, giving thanks to others 52 times.
    Quote Originally Posted by Pilsbury View Post
    I hate to poop on your parade, but in my limited opinion, that bench won’t cut it unless you brace the hell out of it. This thing shifts it’s weight around something chronic!
    I was minded to say something similar about the bench.

    All this discusion of machines jerking around reminded me (as I briefly mentioned above) of the so-called "s-curve" trajectory planning that uses varying as opposed to fixed acceleration rates. The G2Core software (which will run on an Arduino DUE board) from Synthetos includes this and I had a look at using it a few years ago but didn't persue it. For anyone interested there's an explanation on the G2Core wiki at the address below. Presumably this sort of control is implemented in some of the more expensive software but is not yet used in LinuxCNC, MACH3 or UCCNC as far as I can tell from a search on various forums. UGS will drive G2Core but only via USB I think.

    https://github.com/synthetos/g2/wiki...tion-Explained
    Last edited by Kitwn; 12-02-2021 at 02:48 AM.
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How tricky would this be to machine? I guess a Triac is not up to the job!
    By suesi34e in forum Metalwork Discussion
    Replies: 21
    Last Post: 15-06-2016, 05:11 PM
  2. NEW MEMBER: CNC wanabee I guess.
    By aliasant in forum New Member Introductions
    Replies: 2
    Last Post: 07-11-2014, 10:34 PM
  3. plasma advise sought, want to make a a3-a2 sized machine
    By nobby in forum Plasma Table Machines
    Replies: 1
    Last Post: 16-07-2014, 02:53 PM
  4. Make your own Super- PID ... not that hard to make ! .... says electronics genius!
    By Buba b in forum General Electronics
    Replies: 4
    Last Post: 26-04-2013, 08:37 AM
  5. RFQ: help needed to make cnc machine maybe 2-3 and will pay
    By scnc in forum Projects, Jobs & Requests
    Replies: 10
    Last Post: 22-11-2012, 12:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules