My new machine - Guess the make!

[JAZZCNC]

The pendant is plug and play. Dongle in a usb slot and hey presto it works like a charm.

Touch off plate and spanner’s came with the machine

Well, not exactly correct, we set it up UCCNC before you took the machine so the pendants can be added at a later date if required. This is why it just worked for you.
However, that said it's not difficult, just a few settings in the plug-in and it's working. If anyone needs any help getting one to work just ask.

When are we going to see a tutorial on how to install that pendant and tool setter with UCCNC and where did you get the nice spindle spanners?

Kit the pendant is just a plug-in which you select from the plug-ins and adjust a few settings, it's simple enough to do.

The Tool setter is just a "free to use" macro, I think we got it from the UCCNC forum or some website and tweaked it to suit our needs. I would normally write my own but I didn't have time to mess around and UCCNC uses C## which I'm not the best at so it would have taken me even longer.
Again it's not difficult to get working, just copy and paste job into the right macro and make a change to a few settings in the macro to account for the thickness of your offset (touch plate). The wiring is simple, just create a circuit into a single input.

When I have a little time I will post the Macro.

Oh, the spanners are just 5mm plate cut on our plasma, nothing special.