Quote Originally Posted by Doddy View Post
John,

If that DIYCNC board is the one with the dodgy PSU (private conversation) - that has a charge-pump circuit on it which, if enabled, will inhibit the outputs until it detects the charge-pump signal (just a toggling signal) from linuxCNC. That might be an easy win for you.
Hi doddy
I killed that board a while ago , Cant remember what I did to it. Maybe it was when I blew up the 12v PSU
I seem to have blown up more things than Blaster Bates.
https://www.youtube.com/watch?v=h6otv8fyaG8

Is there a cheap replacement out there? (I have ancestors from yorkshire) or do you want to see if you can revive this board again