Hybrid View
-
11-03-2021 #1
Getting sensible measurements of current with the sort of pulsed waveforms you find around VFDs and stepper motors is not a simple matter. Many meters are designed to work with either fixed DC or purely sinusoidal AC and will give missleading results with anything else. Have a look at the spec for your VFD and exactly what the displayed current is meant to represent. As long as the numbers are in spec for the device and nothing is getting uncomfortably hot I would suggest not loosing too much sleep over the exact readings and how they relate to each other.
KitAn optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
-
22-08-2022 #2
Hi everyone,
I have been struggling for weeks to build a serial cable to connect my AM882 drives to Protuner.
Would anyone provide the actual pinout of their cable? That would be so appreciated!!
I got the pinouts that are floating in diagrams all over the web but none work.
I had made this cable years ago and all was working, but I have lost that cable.
I am using the same PC which is dedicated to Protuner.
Thank you so much in advance.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
AM882 software ProTuner & windows 8.1
By paulus.v in forum Computer SoftwareReplies: 11Last Post: 22-09-2017, 02:50 PM -
Stepper motor / driver mismatch?
By lockyg in forum Motor Drivers & ControllersReplies: 9Last Post: 10-02-2016, 09:30 AM -
How do I wire a stepper driver to a stepper motor?
By swood1 in forum Stepper & Servo MotorsReplies: 7Last Post: 21-09-2014, 05:40 PM -
Stepper Motor Driver - cheap similar to ArcEuro 4.2A Bi-Polar Stepper Motor Driver
By craynerd in forum Motor Drivers & ControllersReplies: 1Last Post: 16-03-2014, 07:29 PM -
Stepper Motor Driver v2.3 2A $20 !!!
By Lee Roberts in forum Motor Drivers & ControllersReplies: 15Last Post: 17-05-2009, 10:57 PM
Bookmarks