Thread: Gecko G540 Red Led Issue
-
19-02-2021 #1
Hi All
I am in the process of rewiring a controller for Denford Easimill.
The machine came with a non-working controller that used a GECKO G540 to drive the existing Denford stepper motors.
I have been rewiring and checking the status with the led's on the G540 and up till now has been fine(Green).
I have just tried to plug in the axis and as soon as I plug in more than 1 the led turns red, it doesn't matter which axis I use. If I limit it to 1 it is fine.
The power supply I am using is 60v 10 amp but I have wound it down to 50v.
The G540 is not connected to the parallel port and I have disconnected limit/home switches etc.
Can anyone help? Electronics is not really my strong point so please give me simple answers if possible.
Many thanks.
Greg
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Gecko g540
By Richardtweed in forum General DiscussionReplies: 4Last Post: 08-09-2019, 11:03 AM -
Gecko G540 or?
By JW1977 in forum Gantry/Router Machines & BuildingReplies: 34Last Post: 17-09-2017, 05:28 PM -
FOR SALE: Gecko G540 for sale
By Gytis in forum Items For SaleReplies: 1Last Post: 11-09-2016, 04:35 AM -
FOR SALE: Gecko G540 Driver
By Buba b in forum Items For SaleReplies: 2Last Post: 05-10-2015, 05:57 PM -
Gecko G540
By Sparks in forum Motor Drivers & ControllersReplies: 14Last Post: 29-11-2010, 04:52 PM
Bookmarks