G-Penny 800w Spindle with Invertek Drive Help

[Bilbo9000]

I'm starting it using the keypad on the front of the drive. I've tried setting various speeds between 6k and 24k before hitting start and always the same result. Haven't seen an option for setting poles in the VFD (read manual a few times now). I've assumed as it was given motor rated frequency of 400hz and speed of 24k rpm it will know its a 2 pole motor.

[Clive S]

I'm starting it using the keypad on the front of the drive. I've tried setting various speeds between 6k and 24k before hitting start and always the same result. Haven't seen an option for setting poles in the VFD (read manual a few times now). I've assumed as it was given motor rated frequency of 400hz and speed of 24k rpm it will know its a 2 pole motor.

You are correct there is no mention of poles in the manual !! I can't think of anything else