Hi All

im building a small plasma table 650mm and 750mm ball screws x and y and a kutcarve floating breakaway Z

i have nema 23 motors and a shuttle pc running windows Vista NOT upgradeable to 7 or 10 there is a parallel header on mobo,but only usb ports there is a old copy of mach3 on it from years ago that i bought for another plasma,

question is do i stick with mach3, and if so what breakout board drivers etc, or so i go with obenbuilds black box and openbuilds software?? i also have a old gaming pc thats obsolete but running win 10

decisions decisions .........

Thanks In advance

Steve

Click image for larger version. 

Name:	PXL_20210221_163430771.jpg 
Views:	164 
Size:	401.5 KB 
ID:	29586Click image for larger version. 

Name:	PXL_20210221_163430771.jpg 
Views:	164 
Size:	401.5 KB 
ID:	29586Click image for larger version. 

Name:	PXL_20210221_164111052.jpg 
Views:	149 
Size:	382.3 KB 
ID:	29587Click image for larger version. 

Name:	146278913_23846989142700763_4784988515878374464_n.jpg 
Views:	147 
Size:	94.7 KB 
ID:	29588