Thread: Vacuum cleaner / dust extractor
-
04-03-2021 #11
I've ordered one of these, they seem to have good reviews.
https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1
-
07-03-2021 #12
The best thing I did was build an external box onto my shed workshop where the dust extractor is located and piped in. Got a cheapo remote plug socket thingy off Amazon to turn it on and off.
-
The Following User Says Thank You to Pilsbury For This Useful Post:
-
07-03-2021 #13
I'l be moving my machine into a brick shed at the end of the garden. First of all though Ive got to build a stud frame inside and insulate it all / floating floor etc. I am planning a small room for the dust extraction.
-
22-06-2021 #14
Good afternoon Chillybo - I also purchased one of those and ended up taking it out of the workshop within a few months!
I now use it to VAC the cars!!
I run three cyclonic separators, all on a different workshop Vac.
As long as you have a clean vac bin and full separator bin - its working fine for you!
WoodKnot
-
The Following User Says Thank You to WoodKnot For This Useful Post:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Dust extractor noise!
By andy_con in forum Dust Extraction & CollectionReplies: 7Last Post: 23-09-2020, 09:37 PM -
Which vacuum cleaner (Karcher MV2?)
By d4cnc in forum Dust Extraction & CollectionReplies: 42Last Post: 31-10-2018, 08:16 AM -
Recommend a small Vacuum for use with Dust Commander Vortex?
By Millatime16 in forum Workshop & EquipmentReplies: 12Last Post: 13-04-2018, 01:51 AM -
Building a cnc dust boot / dust skirt extractor
By craynerd in forum Workshop & EquipmentReplies: 3Last Post: 13-03-2016, 01:50 PM -
Cyclone Chip/Dust Extractor for under £20!
By KevinC in forum Dust Extraction & CollectionReplies: 0Last Post: 10-10-2015, 10:51 AM
Bookmarks