. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Big fan of Nilfisk myself, concocted this from bits bought from fleabay, the cyclone is mounted in the middle section. The nilfisk motors are continuously rated, not too noisy and will run 10hrs non stop, not many domestic vacs will do that.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Dust extractor.jpg 
Views:	279 
Size:	160.3 KB 
ID:	29618  

  2. The Following User Says Thank You to johnsattuk For This Useful Post:


  3. #2
    Quote Originally Posted by johnsattuk View Post
    Big fan of Nilfisk myself, concocted this from bits bought from fleabay, the cyclone is mounted in the middle section. The nilfisk motors are continuously rated, not too noisy and will run 10hrs non stop, not many domestic vacs will do that.
    Looks like something the Russians would have sent into space around 1958

    Kit
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

  4. The Following User Says Thank You to Kitwn For This Useful Post:


  5. #3
    These look like good machines!

  6. #4
    I’ve been using a Henry for years. Quiet, cheap (£120), good suction, simple to clean out. I had intended to build or buy a cyclone or just simple in - out intermediate bucket but never got around to it. Just the Henry works great.
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4

  7. The Following User Says Thank You to routercnc For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dust extractor noise!
    By andy_con in forum Dust Extraction & Collection
    Replies: 7
    Last Post: 23-09-2020, 09:37 PM
  2. Which vacuum cleaner (Karcher MV2?)
    By d4cnc in forum Dust Extraction & Collection
    Replies: 42
    Last Post: 31-10-2018, 08:16 AM
  3. Recommend a small Vacuum for use with Dust Commander Vortex?
    By Millatime16 in forum Workshop & Equipment
    Replies: 12
    Last Post: 13-04-2018, 01:51 AM
  4. Building a cnc dust boot / dust skirt extractor
    By craynerd in forum Workshop & Equipment
    Replies: 3
    Last Post: 13-03-2016, 01:50 PM
  5. Cyclone Chip/Dust Extractor for under £20!
    By KevinC in forum Dust Extraction & Collection
    Replies: 0
    Last Post: 10-10-2015, 10:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •