. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Quote Originally Posted by routerdriver View Post
    It isn't every CAD modeller who would have taken the extra time to model the clothes!
    Very true. But I don't think my lady wife would want to appear quite that risque on a public forum.

    She was busy with the housework but kindly agreed to pop off the rubber gloves and hop onto the machine for a quick picture. She appreciates a good laugh as much as the rest of us.

    Kit
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

  2. #2
    There could have been.... rubber gloves?

    Off for a lie-down.

  3. #3
    Quote Originally Posted by Doddy View Post
    There could have been.... rubber gloves?

    Off for a lie-down.
    See my reply to post # 18.

    Kit
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

  4. #4
    Quote Originally Posted by Kitwn View Post

    She was busy with the housework but kindly agreed to pop off the rubber gloves and hop onto the machine for a quick picture.

    Kit
    So your telling me she was doing the housework and just took off the marigolds.... my misses doesn’t do the housework like that..... in fact I’d be pleased if she just did some housework...

  5. #5
    Quote Originally Posted by Pilsbury View Post
    So your telling me she was doing the housework and just took off the marigolds.... my misses doesn’t do the housework like that..... in fact I’d be pleased if she just did some housework...
    Seemed pretty normal to me. I have limited experience of other people's wives, though it sounds like yours doesn't read this forum!

    Kit
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

  6. #6
    Quote Originally Posted by Kitwn View Post
    Seemed pretty normal to me. I have limited experience of other people's wives, though it sounds like yours doesn't read this forum!

    Kit
    Very funny
    ..Clive
    The more you know, The better you know, How little you know

  7. The Following User Says Thank You to Clive S For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What software would be recommend?
    By jtar40 in forum Motor Drivers & Controllers
    Replies: 11
    Last Post: 03-04-2018, 12:50 PM
  2. Recommend me an ATC Spindle
    By andy_con in forum Milling Machines, Builds & Conversions
    Replies: 14
    Last Post: 26-07-2016, 10:40 PM
  3. Can you recommend a UK Supplier for cnc router bits
    By GeoDurie in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 06-06-2014, 10:40 AM
  4. Which kit would you recommend?
    By ian823478 in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 08-04-2012, 11:05 PM
  5. Please Recommend me a CNC mill for....
    By Gasgasbones in forum General Discussion
    Replies: 4
    Last Post: 29-11-2010, 07:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •