Clearpath or DMM

[dazp1976]

Dear
I'm gonna buy a WABECO F1210 milling machine with WABECO Ballscrews.
https://www.wabeco-remscheid.de/fras...pindeln-1.html
and I need to have 4th axis:
https://www.wabeco-remscheid.de/1647.html

Can I use CPM-SDSK-3411S motors for XYZ and A Axes or it's better to use SDSK-3421S? I want to produce Aluminum/Brass/Steel things for the local companies.
Thanks

Seems expensive.
Y axis is a bit short on travel and I wouldn't touch MT2 taper with a bargepole. You want the SK30.
For cnc work 3000rpm is low. You want/need the higher speed one.
Seems ballscrew nuts are single judging the pdf manual. I'd want double nutted ballscrews of at least C5.

Manual machines with standard trapezoid screws at this spec can be <£1400. This means you're paying around £5.5k to £6.5k+ just for the conversion. Seems a bit much.