Clearpath or DMM

[xzsawq21]

Seems expensive.
Y axis is a bit short on travel and I wouldn't touch MT2 taper with a bargepole. You want the SK30.
For cnc work 3000rpm is low. You want/need the higher speed one.
Seems ballscrew nuts are single judging the pdf manual. I'd want double nutted ballscrews of at least C5.

Manual machines with standard trapezoid screws at this spec can be <£1400. This means you're paying around £5.5k to £6.5k+ just for the conversion. Seems a bit much.

Thanks,
Yes I want to buy a F1210 ISO30 edition milling machine:
https://www.wabeco-remscheid.de/cata.../f1210/id/396/

The 1.4Kw motor of F1210 machine is an AEG washing machine motor and housed in the Wabeco control box is an AEG board that controls the motor,
https://www.youtube.com/watch?v=zGnIyLzZ7gM

MDA precision has upgraded the WABECO milling machine:
https://mdaprecision.com/products/be...-800-12000rpm/
https://mdaprecision.com/products/be...peed-cnc-mill/
https://mdaprecision.com/product-cat...htop-cnc-mill/

they have used JAEGER spindles:
https://www.jaegerspindles.com/us/z-line/10301067



What do you think about the motors?