. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #5
    You've had the best advice already. Based on my own experience with video editting on a W7 machine, having only 4GB of RAM is not enough, Windows is already using most of it. Doubling up to 8GB will make a world of difference and make it seem like a new machine anyway. Whether you have to discard the existing RAM or just add an extra 4GB will depend on having available slots on the motherboard.

    I haven't upgraded any of our computers for a while but when I did the research a few years back it was recommended NOT to spend money on the fastest, cutest looking, most expensive RAM available unless you have top components throughout the machine and are doing the most demanding tasks like editting Lord of the Rings or gaming. What is currently seen as vanilla memory from a repuatble maker like Kingston or Corsair is fine.

    I'm interested to see how you get on as my own AXBB-E is due to arrive on Monday and I plan to run UCCNC on this laptop which is a bit long in the tooth and has only 4GB of RAM itself, plus a solid state HD (made a big difference fiiting that) and Windows 10.

    Kit
    Last edited by Kitwn; 08-04-2021 at 11:44 PM.
    An optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: Help needed
    By PeteHowlett in forum DIY Router Build Logs
    Replies: 29
    Last Post: 02-05-2020, 04:23 AM
  2. Help needed
    By terry1956 in forum General Electronics
    Replies: 5
    Last Post: 06-11-2018, 02:28 PM
  3. help needed with my set up
    By amxen in forum General Electronics
    Replies: 20
    Last Post: 12-07-2018, 11:19 AM
  4. a little more help needed
    By terry1956 in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 29-02-2016, 05:52 PM
  5. PSU help needed
    By John11668 in forum General Electronics
    Replies: 7
    Last Post: 04-11-2014, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •